Enter valid dimensions to see the concrete volume.
Concrete needed (with wastage)
–m³
–
Volume without wastage
–
Wastage added
–
Cubic feet (cft)
–
Cubic yards
–
Approximate materials for the selected mix
What is a concrete calculator?
A concrete calculator works out how much concrete a job needs, so you can order the right amount the first time. You enter the size of the area you are pouring, such as a slab, footing, wall or column, and the calculator turns it into a volume in cubic yards, cubic feet or cubic metres. Ordering too little means a second delivery and a cold joint. Ordering too much means paying for concrete that ends up as waste.
The free concrete calculator above also shows the number of cement bags you need, plus the cement, sand and aggregate for the mix ratio you choose. It runs in any browser on your phone or computer, so you can use it on site as well as at home.
How to use this concrete calculator
- Choose the shape. Pick slab or floor, footing or beam, wall, round column or square column.
- Enter the dimensions. Each measurement has its own unit, so you can work in feet and inches, yards, metres or centimetres, and even mix them.
- Set the quantity and wastage. Use 5% to 10% extra for spillage, uneven ground and over-excavation.
- Pick your mix ratio. This is used for the cement, sand and aggregate estimate.
- Read the result. You get the total concrete needed in cubic metres, cubic feet and cubic yards, along with the materials.
Concrete calculator formula
Every concrete calculation comes down to one idea: concrete volume is length times width times depth (thickness). The only trick is keeping the units consistent. Here is the concrete calculator formula in the units people use most.
Concrete calculator formula in meters
Volume (m³) = Length (m) × Width (m) × Thickness (m)
If your thickness is in millimetres or centimetres, convert it to metres first (150 mm = 0.15 m, and 10 cm = 0.1 m). For example, a slab that is 5 m long, 4 m wide and 150 mm thick needs 5 × 4 × 0.15 = 3 m³ of concrete. Add 5% wastage and you should order about 3.15 m³.
Concrete calculator formula in feet and yards
Cubic feet = Length (ft) × Width (ft) × Thickness (in) ÷ 12
Cubic yards = Cubic feet ÷ 27
There are 27 cubic feet in one cubic yard. For example, a 10 ft by 10 ft patio that is 4 inches thick needs 10 × 10 × 4 ÷ 12 = 33.3 cubic feet, which is 1.24 cubic yards. With 10% extra, order about 1.36 cubic yards.
Other shapes
- Round column or pier: Volume = π × (diameter ÷ 2)² × height
- Wall: Volume = length × height × thickness
- Footing or beam: Volume = length × width × depth
Concrete calculator for slab
A slab is the most common job, and the numbers are simple. Measure the length and width of the area, decide on the thickness and use the formula above. Typical residential thicknesses range from about 4 inches (100 mm) for paths and patios to 6 inches (150 mm) or more for driveways and garage floors, but always follow your plans, local building rules or an engineer’s advice for structural work.
To keep your measurements honest, remember that the slab thickness matters as much as the area. A small change in thickness changes the volume a lot: moving from 4 inches to 6 inches adds 50% more concrete.
Concrete calculator square feet: how far does a yard go?
If you already know the area in square feet, you do not need to measure length and width again. Multiply the square footage by the thickness in feet (inches ÷ 12) to get cubic feet, then divide by 27 for cubic yards. The table below shows how many square feet one cubic yard of concrete covers at common thicknesses.
| Slab thickness | Coverage per cubic yard | Coverage per cubic metre |
|---|---|---|
| 2 in (50 mm) | 162 sq ft | 20 m² |
| 3 in (75 mm) | 108 sq ft | 13.3 m² |
| 4 in (100 mm) | 81 sq ft | 10 m² |
| 5 in (125 mm) | 64.8 sq ft | 8 m² |
| 6 in (150 mm) | 54 sq ft | 6.7 m² |
So a 400 sq ft driveway at 4 inches thick needs about 400 ÷ 81 = 4.9 cubic yards, before wastage.
Concrete calculator yards: converting between yards, feet and metres
Ready-mix concrete in the United States is sold by the cubic yard, while most other countries use cubic metres. These conversions help when you are comparing quotes or reading a bag label.
- 1 cubic yard = 27 cubic feet = 0.7646 m³
- 1 cubic metre = 35.31 cubic feet = 1.308 cubic yards
- 1 cubic foot = 0.0283 m³
Our concrete calculator shows the answer in all three units at once, so you never have to convert by hand.
Concrete calculator triangle
Not every pour is a rectangle. For a triangular slab, such as a corner pad or a wedge-shaped landing, find the area of the triangle first, then multiply by the thickness.
Triangle area = ½ × base × height
Volume = Triangle area × Thickness
For example, a triangle with a 10 ft base and 6 ft height has an area of ½ × 10 × 6 = 30 sq ft. At 4 inches thick, the volume is 30 × (4 ÷ 12) = 10 cubic feet, or about 0.37 cubic yards.
Quick trick with the calculator above: choose Slab / Floor, enter the triangle’s area as the length (30 ft) and 1 ft as the width, then add the thickness. The result is the same as the triangle calculation. For irregular shapes, split the area into rectangles and triangles, work out each one and add them together.
Bag concrete calculator: how many bags do you need?
For small jobs such as fence posts, steps, small pads or repairs, bagged concrete mix is often more practical than a truck delivery. A bag concrete calculator divides the volume you need by the volume that one bag makes.
Bags needed = Total volume ÷ Yield per bag
Yields differ a little by brand, so always check the label on the bag. As a general guide, common bag sizes make roughly the following:
| Bag size | Approx. yield | Bags per cubic yard | Bags per m³ |
|---|---|---|---|
| 40 lb (18 kg) | 0.30 cu ft | about 90 | about 118 |
| 60 lb (27 kg) | 0.45 cu ft | about 60 | about 79 |
| 80 lb (36 kg) | 0.60 cu ft | about 45 | about 59 |
Using the 10 ft by 10 ft patio from earlier (33.3 cubic feet), you would need about 33.3 ÷ 0.6 = 56 bags of 80 lb mix. With 10% extra, that becomes about 62 bags. That is a lot of lifting, which is a good sign that ready-mix delivery may be easier once a job passes a cubic yard or so.
Concrete calculator Home Depot and other store bags
Many people search for a concrete calculator for Home Depot bags because they plan to buy bagged mix from a home-improvement store. The method is the same for any store or brand: work out your volume, then divide by the yield printed on the bag (usually given in cubic feet). Pick the bag size that suits you, round up and buy one or two extra. ClacWise is an independent website and is not affiliated with Home Depot or any bag manufacturer.
Concrete calculator cement sand aggregate
If you mix concrete yourself, you need to know how much cement, sand and aggregate (gravel or crushed stone) to buy. The mix ratio tells you the parts of each material. A 1:2:4 mix means one part cement, two parts sand and four parts aggregate, measured by volume.
Wet concrete is smaller than the loose materials that go into it, because the sand fills the gaps between the stones and the cement fills the gaps between the sand. To allow for this, the dry volume is taken as about 1.54 times the wet volume. The calculation is:
Dry volume = Wet volume × 1.54
Cement = Dry volume × Cement part ÷ Total parts
Sand = Dry volume × Sand part ÷ Total parts
Aggregate = Dry volume × Aggregate part ÷ Total parts
A 50 kg bag of cement is about 0.0347 m³, so divide the cement volume by 0.0347 to get the number of bags. Here is what you need for 1 m³ of finished concrete, before wastage:
| Mix ratio | Cement (50 kg bags) | Sand | Aggregate |
|---|---|---|---|
| 1 : 1 : 2 (M25) | about 11 bags | 0.39 m³ | 0.77 m³ |
| 1 : 1.5 : 3 (M20) | about 8 bags | 0.42 m³ | 0.84 m³ |
| 1 : 2 : 4 (M15) | about 6.3 bags | 0.44 m³ | 0.88 m³ |
| 1 : 3 : 6 (M10) | about 4.4 bags | 0.46 m³ | 0.92 m³ |
For the 5 m × 4 m × 150 mm slab (3.15 m³ with 5% wastage) at 1:2:4, the calculator gives about 20 bags of cement, 1.39 m³ of sand and 2.77 m³ of aggregate. These are estimates for a standard mix. Moisture in the sand, how well the materials are packed and the way you measure all change the real quantities, so buy a little extra.
Concrete calculator price and cost: how to estimate your budget
A good concrete calculator gives you the volume. To turn that into a price, multiply by the cost per unit that your supplier quotes. Prices change with your location, the strength of the mix, the size of the order and the delivery distance, so use a current local quote rather than a number from a website.
Cost = Volume with wastage × Price per cubic yard (or m³) + delivery + extras
For example, if the volume with 10% wastage is 1.36 cubic yards and a supplier quotes $150 per cubic yard (an example figure only, not a market price), the concrete costs about 1.36 × 150 = $204. Then add anything else on the quote.
What affects the concrete cost?
- Mix strength and type: higher-strength mixes, fibre, air-entrained or coloured concrete cost more.
- Order size: small loads often carry short-load or minimum-order fees, which can make the cost per yard much higher.
- Delivery: distance, access and waiting time on site can add charges.
- Pumping: if the truck cannot reach the pour, a pump adds to the bill.
- Reinforcement, formwork and labour: steel mesh or rebar, timber forms and finishing are separate costs.
For a DIY pour with bagged mix, multiply the number of bags by the price per bag. Compare that with a ready-mix quote for the same volume. For small jobs, bags often win, and for larger pours, ready-mix is usually more economical and quicker.
Concrete calculator UK and Australia
In the UK and Australia, concrete is ordered in cubic metres, so the metric formula (length × width × thickness, all in metres) is the one to use. Our calculator accepts metres, centimetres and millimetres, so you can enter a 100 mm slab thickness directly without converting it.
- UK: bagged mixes and ballast are commonly sold by weight, and ready-mix is quoted per m³. Check whether a supplier’s minimum load suits a small job.
- Australia: ready-mix is ordered per m³ and specified by strength grade, for example N20, N25 or N32. Ask your supplier or engineer which grade your job needs.
The same cement, sand and aggregate method works anywhere, as long as you use the dry-volume factor and the correct bag size for your country.
Concrete calculator app: do you need to download one?
You do not need to install a concrete calculator app. This calculator is a mobile-friendly web tool, so it works on any phone, tablet or computer, and it is free. To get app-style access, add this page to your home screen:
- iPhone (Safari): tap Share, then Add to Home Screen.
- Android (Chrome): open the menu, then tap Add to Home screen or Install app.
Concrete Basement Calculator London
A concrete basement calculator in London helps homeowners and builders estimate the concrete required for basement floors, walls, and foundations. Enter the length, width, and thickness of each section to calculate the total volume in cubic metres (m³). Add 5–10% extra to account for wastage and uneven surfaces.
Calculate Concrete Cubic Meter London
To calculate concrete in cubic metres in London, multiply the length, width, and depth of your concrete area, using measurements in metres. The formula is Length × Width × Depth = Concrete Volume (m³). This calculation helps you estimate the quantity of ready-mix concrete required for your construction project.
Concrete Basement Calculator Chipstead
A concrete basement calculator for Chipstead makes it easier to estimate the concrete needed for basement construction and renovation projects. Measure the basement’s length, width, and depth in metres to calculate the required concrete volume. Accurate measurements help reduce material waste and avoid ordering too much or too little concrete.
How to Calculate Concrete in m3 Epsom
Calculating concrete in m³ in Epsom is simple when you know the dimensions of your project. Multiply the length by the width and thickness in metres to find the required volume. For example, a 5m × 4m slab with a 0.1m thickness requires 2 cubic metres of concrete before adding extra for wastage.
Cubic Yard Concrete
A cubic yard is a standard unit used to measure concrete volume, particularly in the United States. One cubic yard of concrete equals approximately 0.7646 cubic metres, making it useful when converting between imperial and metric measurements. Knowing this conversion helps you compare concrete quantities and estimate materials accurately.
SEO tip: For the UK-focused sections, use both terms cubic yards and cubic metres (m³) naturally. UK concrete suppliers generally quote prices per cubic metre. Typical published 2026 ready-mix estimates are around £100–£160 per m³, although London prices, delivery and minimum-order charges can be higher. Try Our Job Estimator Tool+2
Tips to avoid ordering too much or too little concrete
- Measure twice. Check the length, width and especially the thickness, and measure the actual formwork, not the plan.
- Add wastage. Allow 5% to 10% for spillage, uneven sub-base and form movement. Use the higher figure for rough ground or a first-time pour.
- Round up. Order to the next practical amount, such as the next quarter yard or the next 0.1 m³, and buy full bags.
- Prepare before delivery. Have the forms, base, reinforcement and helpers ready, because concrete starts setting as soon as it is mixed.
- Check the weather. Very hot, cold or wet conditions affect how concrete sets and may need extra precautions.
- Get advice for structural work. For foundations, load-bearing members or anything where safety is involved, follow your drawings and consult a qualified engineer.
Concrete calculator FAQ
How do I calculate how much concrete I need for a slab?
Multiply the length, width and thickness, using the same unit for all three. In metres, that gives cubic metres. In feet, divide the cubic feet by 27 to get cubic yards. Then add 5% to 10% for wastage. The calculator above does all of this for you.
What is the concrete calculator formula in meters?
Volume in cubic metres equals length in metres times width in metres times thickness in metres. For example, 5 m × 4 m × 0.15 m = 3 m³. Convert millimetres or centimetres to metres before multiplying.
How many square feet does one yard of concrete cover?
One cubic yard covers about 81 square feet at 4 inches thick, 54 square feet at 6 inches thick and 108 square feet at 3 inches thick. Thinner slabs cover more area, and thicker slabs cover less.
How many bags of concrete are in a yard?
A cubic yard is 27 cubic feet. With an 80 lb bag that yields about 0.6 cubic feet, you need about 45 bags. A 60 lb bag at about 0.45 cubic feet takes about 60 bags, and a 40 lb bag at about 0.3 cubic feet takes about 90 bags. Always check the yield printed on your brand of bag.
How do I calculate concrete for a triangle?
Work out the triangle’s area with one half times base times height, then multiply by the thickness to get the volume. Convert the units so that they match before you multiply.
How much cement, sand and aggregate do I need?
Multiply the wet volume by 1.54 to get the dry volume, then split it by your mix ratio. For a 1:2:4 mix, one cubic metre of concrete needs about 6.3 bags of 50 kg cement, 0.44 m³ of sand and 0.88 m³ of aggregate. The calculator shows these figures for the mix you select.
How do I estimate the price or cost of concrete?
Multiply the volume, including wastage, by the price per cubic yard or cubic metre from a local supplier, then add delivery, pumping and any short-load fees. Prices vary by region, mix and order size, so ask for a written quote.
Is there a free concrete calculator app?
This free concrete calculator works in your phone’s browser, so there is nothing to download. You can add it to your home screen to open it like an app.
Does this concrete calculator work for the UK and Australia?
Yes. You can enter measurements in metres, centimetres or milli metres and get the result in cubic metres, which is the unit used for ready-mix in both countries.
How Many Bags of Concrete Do I Need for a 3×5 Slab?
For a 3×5-foot concrete slab with a standard thickness of 4 inches, you need approximately 5 cubic feet of concrete. This is roughly 9 bags of 80-pound ready-mix concrete, assuming each bag produces about 0.6 cubic feet. Always check the manufacturer’s stated coverage before purchasing.
How Much Is a Cubic Yard of Concrete?
The cost of one cubic yard of concrete depends on your location, concrete grade, delivery charges, and supplier. In the UK, concrete is commonly priced per cubic metre rather than cubic yard. Always request a supplier’s quote to get an accurate estimate, including delivery and additional fees.
How Much Concrete Do I Need for a 24×24 Slab?
To calculate concrete for a 24×24-foot slab, multiply the length by the width and thickness. For a standard 4-inch-thick slab, you will need approximately 7.11 cubic yards of concrete. Add around 10% extra to allow for waste and uneven ground, bringing the total to approximately 7.82 cubic yards.
A Concrete Mix Is Made by Mixing Sand, Gravel and Cement in the Ratio of 5:7:6. The Total Quantity of Concrete Produced Is 36kg. How Much Sand, Gravel and Cement Is Needed?
The total ratio is 5 + 7 + 6 = 18 parts. Divide 36 kg by 18 to get 2 kg per part. Therefore, you need 10 kg of sand, 14 kg of gravel, and 12 kg of cement to make the 36 kg mixture.
Please note: results are estimates for planning and ordering. Site conditions, mix design and local regulations vary, so confirm quantities with your supplier and get professional advice for structural work.
