10% suits straight layouts. Use 15% or more for diagonal or patterned layouts.
Enter a box price, a tile price, or both to compare.
Enter valid measurements to see how many tiles you need.
Tiles needed
–
–
Boxes needed
–
–
Area to tile
–
Area with extra
–
Tile size
–
Tiles before extra
–
Estimated cost
A Tile Calculator helps you estimate how many tiles you need to cover a floor, wall, bathroom, kitchen, backsplash, or other tiled surface. Instead of guessing the quantity, you can calculate the required number of tiles based on your surface dimensions and the size of each tile. This makes it easier to plan your project, estimate material costs, and reduce unnecessary waste.
Whether you are renovating a small bathroom or installing new tiles throughout your home, knowing the correct tile quantity can save both time and money. Enter the length and width of your area, select your tile dimensions, and calculate the estimated number of tiles required for your project.
Your Tile Estimate
Your tile estimate shows the approximate number of tiles needed to cover your selected surface. The calculation depends on the total area, individual tile size, and additional tiles required for cutting, breakage, and future repairs.
For example, if you want to cover a 120-square-foot floor with 12 × 12-inch tiles, you will need 120 tiles before accounting for wastage. Adding 10% extra means purchasing approximately 132 tiles.
Your final quantity may vary depending on the room layout, tile pattern, grout spacing, and the number of cuts required around corners, doors, and fixtures.
How to Use the Tile Calculator
Follow these steps to calculate the number of tiles required for your project:
- Measure the area: Measure the length and width of the floor or wall you want to cover.
- Choose your measurement unit: Use feet, inches, meters, or centimeters, depending on the calculator’s available options.
- Enter the tile dimensions: Input the length and width of one tile.
- Calculate the surface area: The calculator determines the total area that needs to be tiled.
- Add a wastage allowance: Include extra tiles for cutting, breakage, and future replacements.
- Review your estimate: Check the total number of tiles and, if supported, the estimated material cost.
For accurate results, use the same measurement units throughout the calculation. If your room has separate sections, measure each section individually and add their areas together.
How Many Tiles Do I Need?
The number of tiles you need depends on the total surface area and the area covered by each tile.
For a rectangular surface, calculate the area by multiplying its length by its width. Then divide the surface area by the area of one tile.
Tile Calculator Formula:
Total Surface Area = Length × Width
Tile Area = Tile Length × Tile Width
Number of Tiles = Total Surface Area ÷ Tile Area
Always convert the measurements into the same units before dividing. For example, when the room area is measured in square feet, convert the tile area into square feet as well.
Example: Calculating Tiles for a Bedroom Floor
Suppose your bedroom is 12 feet long and 10 feet wide, and you want to install 12 × 12-inch square tiles.
Step 1: Calculate the floor area.
Floor Area = 12 × 10 = 120 square feet
Step 2: Convert the tile dimensions.
A 12 × 12-inch tile measures 1 × 1 foot.
Tile Area = 1 × 1 = 1 square foot
Step 3: Calculate the number of tiles.
Number of Tiles = 120 ÷ 1 = 120 tiles
Step 4: Add 10% extra tiles.
Extra Tiles = 120 × 0.10 = 12 tiles
Total Tiles = 120 + 12 = 132 tiles
You should purchase approximately 132 tiles to cover the bedroom, assuming the measurements are accurate and a 10% wastage allowance is suitable for the layout.
Real-Life Example: Tiling a Bathroom Floor
Imagine that Ahmed is renovating his bathroom. The floor measures 8 feet long and 6 feet wide. He plans to use ceramic tiles measuring 12 × 24 inches and wants to include an allowance for cutting and breakage.
He needs to determine the tile quantity before visiting the hardware store.
Step 1: Find the bathroom floor area.
Floor Area = 8 × 6 = 48 square feet
Step 2: Calculate the area of one tile.
The tile measures 12 × 24 inches, equivalent to 1 × 2 feet.
Tile Area = 1 × 2 = 2 square feet
Step 3: Calculate the base tile quantity.
Number of Tiles = 48 ÷ 2 = 24 tiles
Step 4: Add 10% for wastage.
Extra Tiles = 24 × 0.10 = 2.4 tiles
Because tiles are purchased as whole pieces, round the total quantity up:
Total = 24 + 2.4 = 26.4 tiles
Ahmed should purchase at least 27 tiles if individual tiles are sold separately. If the tiles are sold in boxes, he should round up to the next complete box based on the manufacturer’s coverage information.
This example assumes the bathroom floor is a simple rectangle. If the bathroom contains irregular sections, drains, built-in fixtures, or other obstacles, he should measure the actual tiled area and consider the additional cutting requirements.
How Much Tile Do I Need for a Wall?
You can use a tile calculator for walls as well as floors. This is useful when installing tiles in bathrooms, kitchens, laundry rooms, or shower areas.
To calculate wall tiles, multiply the wall height by its width. For multiple walls, calculate each wall separately and add the results together.
Wall Area Formula:
Wall Area = Wall Height × Wall Width
For example, suppose a kitchen backsplash measures 10 feet wide and 2 feet high.
Wall Area = 10 × 2 = 20 square feet
If each tile covers 0.5 square feet, the basic requirement is:
20 ÷ 0.5 = 40 tiles
With a 10% wastage allowance, the estimated requirement becomes:
40 × 1.10 = 44 tiles
You would need approximately 44 tiles, subject to the final layout and any adjustments for outlets, cabinets, corners, and other features.
Should You Subtract Doors and Windows?
For large wall openings, subtracting the area that will not be tiled can improve your estimate. For example, if a wall measures 100 square feet and a window occupies 10 square feet, the net tiled area is 90 square feet.
However, small openings may not reduce the number of tiles you purchase because cutting tiles around edges can create additional waste. Measure the actual tiled surface and consider the layout before adjusting your order.
How Much Extra Tile Should I Buy?
It is usually sensible to purchase more tiles than the exact calculated quantity. Tiles may break during transportation or installation, and some pieces must be cut to fit the room’s edges.
The appropriate allowance depends on the shape of the room, tile size, installation pattern, and installer experience.
| Project Type | Suggested Wastage Allowance |
|---|---|
| Simple rectangular room | 5–10% |
| Room with corners and obstacles | 10–15% |
| Diagonal or complex pattern | 15% or more |
| Future repair reserve | Consider keeping spare tiles |
These are general planning estimates, not fixed industry requirements. Your installer or tile supplier may recommend a different allowance.
Wastage Formula:
Total Tiles to Buy = Base Tile Quantity × (1 + Wastage Percentage ÷ 100)
For example, if your project requires 200 tiles and you add 10% extra:
200 × 1.10 = 220 tiles
You should plan to buy 220 tiles, rounded up to whole tiles or complete boxes as applicable.
Tile Calculator for Different Tile Sizes
Tile dimensions affect the total quantity required. Larger tiles generally cover more area per piece, while smaller tiles require more individual pieces to cover the same surface.
The following examples show the approximate tile quantities needed for a 100-square-foot surface before adding extra tiles for wastage.
| Tile Size | Area per Tile | Tiles Needed |
|---|---|---|
| 6 × 6 inches | 0.25 sq ft | 400 |
| 12 × 12 inches | 1 sq ft | 100 |
| 12 × 24 inches | 2 sq ft | 50 |
| 18 × 18 inches | 2.25 sq ft | 45 |
| 24 × 24 inches | 4 sq ft | 25 |
These calculations assume the listed tile dimensions are the actual dimensions used for area calculations. Always check the product packaging for the manufacturer’s stated coverage, especially when tiles are sold in boxes.
How to Calculate Tile Cost
Knowing the number of tiles is only one part of your renovation budget. You should also estimate the cost of tiles and other materials required for installation.
Tile Material Cost Formula:
Tile Cost = Total Tiles Required × Price per Tile
For example, suppose you need 132 tiles and each tile costs $2.50.
Tile Cost = 132 × $2.50 = $330
Your estimated tile material cost is $330.
If the supplier sells tiles by the box, calculate the number of boxes required and multiply it by the price per box instead. You may also need to budget for adhesive, grout, spacers, underlayment, waterproofing materials, delivery, and professional installation.
Real-Life Tile Budget Example
Suppose you want to tile a 120-square-foot living room using tiles that cost $3 per square foot. You decide to add 10% extra material.
Required area with wastage:
120 × 1.10 = 132 square feet
Estimated tile cost:
132 × $3 = $396
Your estimated tile material cost is $396 before taxes, delivery, installation, and other supplies.
If the tiles are sold only in boxes covering 12 square feet each, you need 11 boxes because 132 ÷ 12 = 11. If the box coverage differs, round up to the next whole box.
How to Calculate Tiles in Square Meters
If your measurements are in meters or centimeters, you can calculate tile quantities using square meters instead of square feet.
Formula:
Surface Area = Length in Meters × Width in Meters
Tile Area = Tile Length in Meters × Tile Width in Meters
Number of Tiles = Surface Area ÷ Tile Area
For example, a floor measures 4 meters long and 3 meters wide.
Floor Area = 4 × 3 = 12 square meters
If each tile measures 0.5 × 0.5 meters:
Tile Area = 0.5 × 0.5 = 0.25 square meters
Number of Tiles = 12 ÷ 0.25 = 48 tiles
With a 10% wastage allowance, the estimated quantity is:
48 × 1.10 = 52.8 tiles
Round up to 53 tiles if individual pieces are available, or purchase enough complete boxes to cover the required area.
Does Grout Spacing Affect Tile Calculations?
Grout spacing creates small gaps between tiles, but most basic tile calculations use the nominal tile dimensions and total surface area. For many ordinary projects, this provides a practical estimate.
The actual installation layout can still affect the number of tiles required, particularly when tiles are arranged in complex patterns or cut around corners. Tile dimensions, joint width, starting points, and edge cuts all influence the final layout.
For an accurate order, use the tile manufacturer’s stated coverage per box and confirm the installation plan with your contractor or installer.
Common Mistakes to Avoid When Estimating Tiles
Avoid these common mistakes when planning a tiling project:
- Using inconsistent units: Do not divide square feet by tile area measured in square inches without converting the units.
- Forgetting wastage: Buying exactly the calculated number can leave you short after cutting or breakage.
- Ignoring irregular shapes: Measure L-shaped rooms and other irregular areas in separate sections.
- Misreading box coverage: Check whether the packaging lists the number of tiles, total area, or both.
- Underestimating installation patterns: Diagonal layouts, borders, and decorative designs may require more material.
- Failing to keep spare tiles: Retain a few matching tiles for future repairs, particularly if the product may later be discontinued.
Taking accurate measurements before purchasing materials can help you avoid delays and reduce unnecessary expenses.
Realated calculator’s
Mulch Calculator
Gravel Calculator
concrete calculator
Frequently Asked Questions
How do I calculate how many tiles I need?
Measure the length and width of your surface, multiply them to calculate the total area, and divide that area by the area of one tile. Add a suitable wastage allowance and round up to whole tiles or complete boxes.
How many 12 × 12-inch tiles do I need for 100 square feet?
A 12 × 12-inch tile covers 1 square foot. You need 100 tiles for 100 square feet before wastage. With a 10% allowance, plan for approximately 110 tiles.
How many tiles do I need for a 10 × 12-foot room?
The room covers 120 square feet. If you use 12 × 12-inch tiles, you need 120 tiles before wastage. With 10% extra, the estimated quantity is 132 tiles.
How much extra tile should I buy?
For a straightforward rectangular room, 5–10% extra is a common planning allowance. Complex layouts, diagonal patterns, and rooms with many obstacles may require 10–15% or more. Follow your installer’s advice for your specific project.
Can I use a tile calculator for bathroom walls?
Yes. Enter the wall height and width to calculate the wall area, then divide by the area of each tile. For multiple walls, calculate and combine the areas, accounting for openings and cutting requirements.
How do I calculate tile cost per square foot?
Divide the price of a tile by its coverage in square feet to determine its price per square foot. If a box costs $36 and covers 12 square feet, the material costs $3 per square foot before other expenses.
Should I buy tiles by the piece or by the box?
Many tiles are sold in boxes with a stated coverage area. Calculate your required coverage, including wastage, and round up to the next complete box. This helps ensure that you purchase enough material for the project.
Can I calculate tiles for an irregular room?
Yes. Divide the room into smaller rectangular or square sections, calculate each section’s area, and add the results together. Subtract large areas that will not be tiled where appropriate, then include a suitable allowance for cuts and waste.
Does tile size change the total cost?
Tile size can affect the number of individual tiles, packaging, installation time, and waste. However, the total material cost also depends on the price per tile or per square foot, the quality of the product, and the installation requirements.
Conclusion
A Tile Calculator helps you estimate the number of tiles required for floors, walls, bathrooms, kitchens, and other surfaces. By entering accurate dimensions and selecting the correct tile size, you can estimate material quantities, account for wastage, and prepare a more realistic renovation budget.
Before purchasing tiles, double-check your measurements, review the coverage stated on the packaging, and include enough extra material for cuts and future repairs. Use the Tile Calculator to plan your project with greater confidence and avoid the cost and inconvenience of ordering too few tiles.
